400-CG

Description: Electrode for Joining and Cushioning Tool and Die Steels

Sizes: 3/32, 1/8, 5/32

Typical Application: For joining and under laying oftool steels, High Carbon, High Maganese, Stainless and Die Steels. Also used for repair of high temperature and corrosion resistant alloys.

T-400-CG TIG Wire for Joining,
Cushioning and Build-Up on
Tool and Die Steels
.035

.045

1/16

3/32

1/8

Typical Application:
For overlays on cold and semi-
hot working tool sections such as
trimmers, punches, and draw
beads. It is especially suited for
areas with high gaulding
problems. Also ideal for
fabricating composit dyes.

999-HW Universal Hot Work Tool Steel
Electrode
3/32

1/8

5/32

Typical Application:
Used in a wide range of tool
steel applications, making it
ideally suiuted for coldshears,
header discs, trim dyes, punches
and sledge hammer faces.
T-999-HW
Premium Hot Work Tool Steel
TIG Wire

.035

.045

1/16

3/32

1/8

Typical Application:
Used for repair of air harden and
die steels. Examples include:
Blanking Dies, Forming Dies,
Extrusion and Coining Dies.
When a cushion layer is required
Vulcan 400-CG is
recommended.

HTC-999-
HW A Premium Hot Work Metallic
Cored MIG Wire for Repair of
Tool and Die Steels .045
Typical Application:
Used for repairing of draw
beads, hold-down beads, high
light lines and draw radii areas
on all types of iron draw dies,
including gray nodular ductile
and special cast alloys.

910-AH A Universal Air Harden Tool
Steel Electrode
3/32

1/8

5/32
T-910-AH A Universal Air Harden Tool
Steel TIG Wire
.035

.045

1/16

3/16

1/8
MTC-910-
AH A Universal Air Harden
Metallic Cored MIG Wire for
Repair of Tool and Steels .045
450-DD Electrode for Repair of Cast
Iron & Cast Steel Draw Dies
3/32

1/8

5/32

3/16
T-450-DD TIG Wire for Repair of Cast
Iron and Cast Steel Draw Dies
.035

.045

1/16

3/32

1/8
MTC-450-
DD Metallic Cored MIG Wire for
Repair of Cast Iron & Cast
Steel Draw Dies
.045

1/16