Drill Head H15010P
$18,315.00
Serial No. Prefix D
Drilling or tapping cannot begin until the magnet is turned on. Automatic power feed heads can be used both in manual and power feed operations.
Drill heads can be fixtured for special applications. Fixturing can allow this unit to step drill larger diameters.
Automatic power-feed heads have limit switches that prevent operation of drill head if magnetic base becomes dislodged.
Safety devices should be used when drilling horizontally or overhead.
*Please Note: Due to size and weight of Drill Heads you will be contacted regarding shipping costs
Description
| Detail | Description |
|---|---|
| Drill Capacity | 2” |
| Tap Capacity | 2”–6 |
| Motor Horsepower | 8.30 std. / 9.48 opt. |
| Standard Maximum Torque | 3397 in. lbs. |
| Optional Maximum Torque | 5159 in. lbs. |
| Variable R.P.M. | Up to 154 |
| Optional R.P.M. | Up to 115 |
| Feed Method Power | .010 per rev. |
| Optional Power Feed | .005 per rev. |
| Tool Shank | #5 Morse |
| Magnet Capacity | 6000 lbs. |
| Magnet Size | 10” |
| Weight | 255 lbs. (Shipping weight 315 lbs.) |
| Crate Dimensions | Height 24” x Width 17” x Length 36” |
Additional information
| Weight | 315 lbs |
|---|
